Oil/Water Separators
Our in-house designed separators cover compressor outputs from 15 hp right up to large multi-compressor installations. The elegant, no-moving-parts design means nothing to go wrong — just reliable, compliant operation.
- CS75 — up to 75 cfm / 15 hp
- CSR range — 150 to 3,000 cfm
- IBC range — 3,500 & 7,000 cfm
- No gravity pre-separation stage
- Cartridge-type service packs
- Wall or floor mountable
OWS Service Kits
Aftermarket service kits to fit a wide range of popular OWS brands. STELSEP kits use proprietary polypropylene wool/shred media that outperforms activated carbon on every measure.
Compatible brands include: BEKO, Ultrafilter, Domnick Hunter, Jorc, Atlas Copco, Sepura and more. New fitments added regularly.
- Reduced weight vs. carbon kits
- Extended service life
- Cleaner, dust-free handling
- Faster drainage
- Improved outlet quality
- Lower blockage risk
Condensate Drains
Compressed air is expensive — every unnecessary blast from a timed drain adds up. Our zero-loss drain range eliminates that waste by only opening when condensate is actually present.
Timer-Controlled
Simple, reliable and low capital cost. The TD15 A/B solenoid drain suits applications where some air loss is acceptable.
Zero-Loss
Level-sensing drains (ZL310, ZL1300, ZL5000) only discharge when condensate is present — eliminating air waste and paying for themselves quickly.
Accessories
The CSEQ3 flow-equalising manifold is designed for multi-compressor installations over 1,000 cfm, ensuring balanced flow through parallel separator units.
- CSEQ3 splitter manifold
- For systems over 1,000 cfm
- Pairs with CSR and IBC ranges
Laboratory Services
Where you or your customer require a report on the hydrocarbon content of a condensate discharge, we offer a test & report service at a very reasonable cost — results within 5 working days.
- Send a 100–250 ml sample
- Results within 5 working days
- Written report provided